MULTI TV RE-SCAN PROCEDURES

0
15

How to reset your multitv decoder

Source: Ghana/Adomonline.com
Date: 01-06-2016 Time: 09:06:27:am

Follow the appropriate steps to re-scan your Multi TV Decoder if it does not scan automatically

SYNDICATED

MULTI TV HD II/ HD PLUS
1. PRESS THE MENU KEY ON THE REMOTE CONTROLL.
2. PRESS THE SIDE POSITIVE VOLUME KEY >+ TO SELECT
INSTALLATION AND PRESS OK.
3. SCROLL DOWN BY USING THE DOWN CHANNEL KEY (CH-)
TO SELECT MANUAL SEARCH AND PRESS OK
4. SCROLL DOWN TO SELECT SYMBOL RATE
5. USE THE NUMBERS ON THE REMOTE CONTROLL TO ENTER SYMBOL RATE NUMBER 30000
6. PRESS THE BLUE KEY ON THE REMOTE CONTROLL TO SCAN OR TO SEARCH.
7. 10. PRESS EXIT ON THE REMOTE CONTROLL TO EXIT TO START WATCHING YOUR CHANNELS

DIGITAL COMBO DECODER VI/COMBO DECODER T2/S2

1. PRESS THE MENU KEY ON THE REMOTE CONTROLL.
2. PRESS THE SIDE VOLUME KEY >+ TO SELECT
INSTALLATION AND PRESS OK.
3. USE CHANNEL KEY UP AND DOWN (CH+/CH-) TO SELECT OR HIGHLIGHT SATELLITE SETUP AND PRESS OK
4. SCROLL DOWN BY USING THE DOWN CHANNEL KEY (CH-)
TO SELECT MANUAL SEARCH AND PRESS OK
5. SCROLL DOWN TO SELECT SYMBOL RATE
6. USE THE NUMBERS ON THE REMOTE CONTROLL TO ENTER SYMBOL RATE NUMBER 30000
7. PRESS THE BLUE KEY ON THE REMOTE CONTROLL TO SCAN OR TO START SEARCH.
8. AFTER SERCHING,
PRESS EXIT ON THE REMOTE CONTROLL TO EXIT TO START WATCHING YOUR CHANNELS.

CA PLUS SERIES 2/SC 101 S2/MULTI TV HD

1. PRESS MENU ON THE REMOTE CONTROL AND PRESS THE POSITIVE VOLUME KEY (>+) TO SELLECT INSTALLATION
2. SELLECT OR HIGHLIGHT DISH SETTINGS BY USING CHANNEL UP AND DOWN KEY (CH-/CH+) AND PRESS OK
3. ENTER THE DEFAULT PASSWORD (0000) TO OPEN
4. PRESS THE YELLOW KEY (Edit TP) ON THE REMOTE A PAGE WILL OPEN
5. SCROLL DOWN TO SYMBOL RATE AND ENTER THE SYMBOL RATE NUMBER 30000
6. SCROLL DOWN TO SELECT YES AND PRESS OK TO SAVE
7. SCROLL DOWN TO SELECT SERVIC SEARCH AND PRESS OK A PAGE WILL OPEN
8. SCROLL UP AND DOWN TO HIGHLIGHT SEARCH MODE BY USING CHANNEL UP AND DOWN KEY
(CH-/CH+)
9. PRESS POSITVE VOLUME KEY >+ TO CHANGE FROM AUTO TO MANUAL
10. PRESS CHANNEL UP AND DOWN KEY TO SCROLL TO
START SEARCH AND PRESS OK TO SCAN.
11. PRESS MENU OR EXIT, A PAGE WILL DISPLAY
12. PRESS NEGATIVE VOLUME KEY (-+) TO SELLECT INSTALLATION
2. SCROLL UP AND DOWN TO HIGHLIGHT DVB-S AND PRESS
OK
3. ENTER DEFAULT PASSWORD (0000) TO OPEN.
4. SCROLL UP AND DOWN TO HIGHLIGHT DISH SETTING AND PRESS OK
5. PRESS THE YELLOW KEY (Edit TP) ON THE REMOTE A PAGE WILL OPEN
6. SCROLL DOWN TO SYMBOL RATE AND ENTER THE SYMBOL RATE NUMBER 30000
7. SCROLL DOWN TO SELECT YES AND PRESS OK TO SAVE
8. SCROLL DOWN TO SELECT SERVIC SEARCH AND PRESS OK A PAGE WILL OPEN
9. SCROLL UP AND DOWN TO HIGHLIGHT SEARCH MODE BY USING CHANNEL UP AND DOWN KEY
(CH-/CH+)
10. PRESS POSITVE VOLUME KEY >+ TO CHANGE FROM
AUTO TO MANUAL
11. PRESS CHANNEL UP AND DOWN KEY TO SCROLL TO
START SEARCH AND PRESS OK TO SCAN.
12. PRESS MENU OR EXIT, A PAGE WILL DISPLAY
13. PRESS NEGATIVE VOLUME KEY (- PRESS OK
INFORMATION WILL POP UP REQUESTING TO “SEARCH ONLY FTA CHANNELS”? ==>PRESS OK TO START SCANNING MULTI TV CHANNELS.
PRESS EXIT BUTTON 3 TIMES TO BEGIN TO VIEW YOUR SCANNED CHANNELS.

Call 0302211693/4 for further assistance

- Advertisement -